Відео

Contact information

You’re absolutely awesome!!

Where'd you go dude? Make some more content or something.. damn been waiting to long

The 194t air filter cover will not take color either. I tried green and all the white took color good.

I hate people that keep secrets. Like what if you die tomorrow. No one to carry on the legacy. I could just have you port mine then tear it down an get the numbers like that

Absolutely love all my Stihls!

Interesting. Porting seems like such an art. I like rules of thumb like this..

Where'd u go. Looks like its bein a year since your last vid

First I've heard of it so thank you sir

Did you put a vane in that intake?

I thought some of the air was pushed up thru the flywheel area also?

Hello from new Zealand love your video, how do you run a none mtoronic carbs on that, i have seen alot of forms where they use a 660 coil,carb, etc. just want to do a bit of a build in the shed, nothing flash like your setup. Thanks

Amazing job Brody I keep my 500i stock but after seeing this 👀

Is this true with reeds

I specifically chose Husqvarna for my new chainsaw because my local southern states is the only place around with the service center for two-stroke engines. We have a John Deere dealer that sells sthil but does not service them and it’s all about who is going to take care of you when you’re purchasing high-end and professional level equipment. I bought a 592 XP with the autotune 3.0 over a 661 since I knew there was someone I could take it to if I ever had an issue. Western Kentucky

You dont need to do machine work to gain torque in a chainsaw, there are other ways.

don’t know much about chainsaws, but i’ll NEVER own another stihl again for weed eaters. husqvarna all day long. i still have a 7yr old husqy weed eater and starts on the first pull. i’ve owned a stihl and in 1 yr the stihl crapped out. Husqy all day long screw stihl. Also i’ve tried stihl blowers, hedge trimmers and i’ll never buy another one again. i have ALL husqy equipment and have never been happier.

only works if the recoil hosing is reaaaaaaally flat like one off a chainsaw. Couldn't do this on a string trimmer or blower recoil. A new, wound spring needs to be used

I'll pay you to do both my kids engines

Hey that’s really cool. I just ordered a Eastwood powder coating setup after seeing some of your videos. I’m going to be powder coating the case of my old 10mm 044 hopefully next week some time. Who do you get your powders from? Have you found a good match for Stihl grey?

I have a stihl 011 AVT it was my grandfather's, can you get it going for me, I have found all the parts on ebay😊

If you want people to watch your videos you need to clean up your language! Cursing is just a display of one’s lack of knowledge. I for one won’t be back on your channel.

Probably the best video I’ve watched on porting. I feel comfortable giving it a shot now.

What does porting mean?

Someone needs to Sponser Your work...

No John, You are just that Good at what Youre doing...Keep it going my Friend....Love My 500i...

I thought acetone heated up would explode….especially when combined with boiling water

Stihl fan boys lol.

Thats great advice/tip, thanks.

do you any parts?

I cant believe you grind and file parts directly over top of a open crankcase

I just popped out a bearing from my Makita dcs 6401 by following this advice, wooden bench it wasn’t going out, put some ar500 under it and made sure it was flat and POP, bearing came right out. Thank you so much I was really starting to lose hope before pulling up this video.

This is a great help to me. I bought 2 G111 saws and I considered cleaning up the ports. Roughish on the intake and polishing the exahaust. But I won't unless the saw is too disappointing. One bit of advice I got to make them run like the 200t was a gasket delete and to port the muffler. I'm not looking to make it a mini race saw. I just want it to cut as well as my 200t I use to have did. The 200t was brand new when I bought it and just stock.

You could cut this video on half if you'd shut up every now and again

One thing ! Why would anyone ever need to port a chainsaw.. are there tree cutting race's

You did good ! Great saw

I used your method on my MS261cm and it turned out perfect. So I then did my DeWalt impact driver and drill. Looks awesome!!

Thanks so much that looks really easy to do mine fell to bits tonight and was wondering how to do it. Thanks to the power of you tube. Thanks 🙏

Snap-on can also ruin your credit. Lets say you could purchase a $20,000 tool box or after trade-in finance an $8900 scanner. You buy a scan tool, well $8900 is now your new limit and your credit is maxed out on your credit report. Your credit won't improve until you pay it down to less than 29% of the $8900. Which is very hard todo since one of your two week payments per month goes to interest! The interest is added every month so your payoff is the full amount on your receipt! Not to mention if you want the scanner to fully work, their scan tools require a $100 per month subscription! This does not include service information - that's another $200 per month! $1400 torx socket sets and $300 screwdriver sets with only the blade warranty. You can't swap the blade out but one or 2 times by then the plastic handle starts ro degrade crack or chip off. Not worth it. The absolute worst thing on the Snap-on truck that everybody buys are those expensive lights. The worst work lights in the world. Battery don't last long and they fall apart! $170 freaking light is no better than Astro $60 light. But get this, the Snap-on dealer sells those Astro lights too, $170!!!

Hey, this is a really good illustration of what the transfers are doing. Thank you for making this video.

That’s super bad ass!

Great information! quick question since you have these saws available, I'm looking for brake handle for 352c, do all 4 of these units have same handle/lever?

I like chainsaws but live in Florida, don't need one. Didn't stop me from buying a 372 cologne saw and modifying it myself. So when I cut down a tree that was interfering with my driveway I saved most of it to test my saws on. Man I just can't sharpen a chain! This friggin fine dust that coats everything and sticks like glue and my chain is dull once again. Come to find out( plant id app, highly recommend) the tree I had cut down was a southern live oak. Hardest tree in North America(apparently)Not bad when it's green but once its dry its rates 2680 janka. For reference black locust is 1700 janka. Janka. Something else I learned.

This just helped me a bunch. Saved my day

Does anyone know if you can simply take the base basket out on a stock 261 for a gain in compression? Is the squish too tight to accommodate this?

@johnscustomsaws Bro, can I pick your brain for a sec? I am new to chainsaws and have the milwaukee 16" chainsaw (2727-20). In a video someone was talking about a .325 on a 8 pin rim sprocket would be the sweet spot for this saw. I really want to upgrade my saw to those specs, but the milwaukee comes with a 6pin spur sprocket drum. The Oregon website only recommends low profile chains for this saw. In the video the guy mods his sprocket drum by welding a rim sprocket gear onto the drum. Do you know if these saws would take a rim sprocket drum from another manufacturer so I could just buy one? Or are there bars with .325 chain combinations that would fit the milwaukee 6 pin spur sprocket? I would really appreciate your insights into this matter.

I have a 500i but no spark is it the coil?

You had me cracking up with the salty commentary. I feel like there should be a subset of tool box tours with this type of humor 😂

I guess I never knew about the spark plug ring leaking . Good to know. Good video

When you talk about trying to sound SMART, that is about 90% of the people on here. At least you are smart enough to know that most people KNOW what they are doing. THAT makes you smarter than them! A very GOOD simple explanation of a 2 stroke engine....and NO BULL S...T!